c
Num1: Supervisor
TEL 1 M/S SETTING SCREEN
(0):M , (1):S
@ Define the first mobile is the Supervisor or Monitor.
@ 1 = Supervisor, 0 = Monitor
@ Supervisor mobile can control & monitor the system.
@ Monitor mobile only can monitor listen the alarm
SMS message from the system only.
d
Num2: Supervisor
TEL 2 M/S SETTING SCREEN
(0):M , (1):S
@ Define the second mobile is the Supervisor or Monitor.
* If only need one mobile telephone to control ( monitor ),
it just key in one telephone no ( Telephone Num 1 ).
* Under the above a, b. c d screen, use the buttons
4-9, 4-11, Fig. 1 ) to key in.
* After finish to key in the desired no. or function,
should key in the " ENTER " button.
* Before finish the e" TEL " setting, it should key in
" SETUP Button " to return the SETUP SCREEN.
1:AD 2:IO 3: TEL
SETUP SCREEN
4:RP 5:IM 6:SAVE
Then key in " 6 " ( SAVE ), LCD will show :
Save OK!
SETUP->Exit
18
