GSM SMS Alarm Messenger
Pro X (Premium)
28
11.22)
System Parameters Report
PWD:XXXX,PARAMETER
1
%
[SMS Message received]
ST:XXX;T:2006/10/08/08:00;H:X;F1:XXXXXXXXXXX,YY;F2;XXXXXXXXXXX,YY;C1:XXXX
XXXXXXX,Y;C2:XXXXXXXXXXXX,Y;C3:XXXXXXXXXXXX,Y;C4XXXXXXXXXXX,Y;XH:XX#
ST: Unit
Serial
Number
T: Date/Time
H:X Arm/Disarm
F1:
1
st
Control Centre Number
XXXXXXXXXX
Control Centre Number
YY
Automatic Health Report Schedule
C1 1
st
Alarm Report Phone Number
XXXXXXXXXX
Alarm Report Phone Number
Y
Alarm Report enabled/disabled
XH:XX
GSM Network Signal Strength (1 ~ 31)
PWD:XXXX,PARAMETER
2
%
(about Alarm Channel)
[SMS Message received]
ST:XXX;VL:XXXXX,O:AX,BBBB,CCC;
A1M:XXXXX,XXXXX,R,WWWWW,WWWWW,O:AX,BB
BB,CCC;A2M:XXXXX,XXXXX,R,WWWWW,WWWWW,O:AX,BBBB,CCC;
K1:N,O:AX,BBBB,C
CC;#
VL
Min. Operating Voltage, below this level will trigger alarm
7VDC by default
A
alarm report to Control Centre 1
0 means no report
1 means report
X
alarm report to Control Centre 2
0 means no report
1 means report
BBBB
report status for 4 phone numbers
0
means
no
report
1 means “SMS” but no “phone dialing”
2 means “phone dialing” but no “SMS”
3 means “SMS” and then “phone dialing”
CCC
relay output control
0 means control not triggered by alarm
1 means alarm triggered control
K1:N,O:AX,BBBB,CCC;
Alarm 1 status
Refer to next page
