GSM SMS Alarm Messenger
Pro X (Premium)
32
11.25)
System Parameters Report (about AD channels)
PWD:XXXX,PARAMETER
2
%
[SMS Message received]
ST:XXX;VL:XXXXX,O:AX,BBBB,CCC;
A1M:XXXXX,XXXXX,R,WWWWW,WWWWW,O:AX,BB
BB,CCC;A2M:XXXXX,XXXXX,R,WWWWW,WWWWW,O:AX,BBBB,CCC;
K1:A,O:AX,BBBB,C
CC;#
A1
AD
Channel
1
M:XXXXX,XXXXX
Range Value, Start Value
R
AD Value Triggered Alarm enabled
WWWWW,WWWWW
Alarm
Triggered
Threshold High Value
Alarm Triggered Threshold Low Value
A
alarm report to Control Centre 1
0 means no report
1 means report
X
alarm report to Control Centre 2
0 means no report
1 means report
BBBB
report status for 4 phone numbers
0 means no report
1 means “SMS” but no “phone dialing”
2 means “phone dialing” but no “SMS”
3 means “SMS” and then “phone dialing”
CCC
relay output control
0 means control not triggered by alarm
1 means alarm triggered control
A2M…
AD
Channel
2
Note:
AI1 and AI2 values are reported by COMMAND 2 [PWD:XXXX,STATUS%]