GPS/GLONASS Trip Meter
GT
1000C
7
Setup
Displays the general setup menu where
the user can change units, switch
function etc.
Preload Trip A
Preload Trip A. Use the
arrow keys
to choose
a number and the
enter key
to advance to
the next digit.
Preload Trip B
Preload Trip B. Press the
arrow keys
to
choose a number and the
enter key
to
advance to the next digit. Press
enter
to exit
and save.
Reset A…
Sets the action to take on trip B when Trip A is
reset. In “
preload
” mode, trip B will be
preloaded with the value set using the Preload
Trip B function above. In “
leave
” mode, Trip B
will remain at its current value. Press
Enter
to toggle between modes.
Preload Trips
www.gsrlasertools.com.au
