- 40 -
STC 4-16 CT CI
n
et work
Herein you customize the IP Address,
Gateway and Subnet to the local net-
work.
Enter a fixed IP address that is
not yet assigned and is out of the DHCP
range of the router.
You can use the
Hostname
to call up
the user interface without entering the IP
address. To do this, enter the
host name
followed by "
.local
" in the browser (
e.g.
gss.local
). If you operate several head
stations in the network, you must enter
different names here.
—> Write down the IP address and the Host name! Further access to the
device is only possible via the IP address or the host name.
—>
If you have forgotten your IP address, you can reset the network
settings and the password by the reset button
(
0
—> For remote access it is important to setup a gateway with Internet
access.
—> The MAC address is only displayed for information an can not be
changed.
—> Before leaving the menu, changes must be transferred to the head-
end station! Therefore click on button
.
—> After that
is displayed for a short time in the upper right corner.
