- 33 -
HDTA 614 T ASI
—> All stations from the channel strip will be read, and then displayed
with name and station type.
—> If no station is found, the following message will appear in the dis-
play: "
FILTER no Service
".
In this case, check the configuration of the antenna system and
head-end station, as well as the previously adjusted settings for the
cassette.
—> The display shows e.g.:
Bx 4A TV + 01/06
Das Erste
Meaning of the indicators in the example:
"
Bx 4A
"
Slot 4, channel strip "
A
"
"
TV
"
TV channel type
"
+
"
The currently selected station is switched on.
"
01/06
"
The 1st of 6 stations is being displayed.
"
Das Erste
" Station name
Further possible terms displayed:
"
RA
"
Radio channel type
For radio stations, the background of the screen of the
connected TV or test receiver is darkened.
"
–
"
The currently selected station is switched off.
"
*
"
The star means that the TV or radio station selected is
scrambled. To enable the station, the CA module and
the appropriate smart card of the station provider are
required.
—> If a service number (e.g. "
131
") appears instead of "
TV
" or "
RA
",
this indicates that an unnamed station or an undefined data stream
is being received.
• Use the
buttons to call up the stations in sequential order, then use
to activate (indicated by "
+
") or to deactivate them (indicated by
"
–
").
—> Using button
all station can be activated/deactivated.
—> If a station is scrambled (indication "*"), in this menu you select
whether it should be descrambled using an adequate CA module
(only possible via tuner "A" and "C").
