- 34 -
HDTA 614 T ASI
• Press button twice to descramble a station (indication "X").
01/06
Bx 4A TV * X
• Press the
button.
Input signal source ASI:
—> Returning to "Input settings" - "
INPUT
" main menu (page 29). If neces-
sary set further channel strips.
Input signal source Tuner:
—> The "PID monitoring" – "
CA
" submenu is activated.
Pid
monitoring
—> This menu is only displayed if "Tuner" is selected as input signal
In this menu you can switch off the PID monitoring and call up a menu for the
settings of the CA module (dependent on the CA module).
Bx 4A
PID Check on
CA
=>
—> If tuner B or D is selected, this menu is out of order.
Indication:
Bx 4B
/D
CA
– –
PID monitoring:
—> The factory default of the PID monitoring is switched on.
If particular PIDs are not descrambled the CA module is reset. Ad-
ditionally dropouts may occur if several stations are descrambled.
To prevent this the PID monitoring can be switched off.
• Use the
buttons to switch "
off
" or "
on
" the PID monitoring.
• Use the button to activate the menu of the CA module (only if Tuner "A"
or "B" is selected).