- 16 -
HDTV 1000 FM
i
nPut
Par a meters
In this menu you select the input, for which you would like to set the input pa
-
rameters in the submenus.
Bx 4
TunerA
INPUT
OK =>
—> The indication “
OK
” serve for information:
OK - input signal is present at tuner A.
• Use the
buttons to select the input (“
Tuner A
” / “
Tuner B
”
/ "
ASI
"
),
for which you would like to set the input parameters.
—> There are no input parameter settings for the
ASI input
. Select "ASI",
in order to check whether a ASI input signal is present ("OK" is
displayed).
—> To skip the settings of the input parameters press the
but-
ton. The “Delete programme locations” – “
SERVICES
” main menu is
• Press the
button.
—> The “LNB oscillator frequency” – “
LNB
” submenu is activated.
lnb
osCill ator
frequenCy
Set the oscillator frequency of the LNB used in this menu.
Bx 4A
/B
10600 MHz
LNB
• Using the
button the oscillator frequencies ”10600“ or ”9750“
can be selected directly.
• To set other oscillator frequencies use the
buttons to place the cursor
under the digit of the oscillator frequency displayed to be set.
• Press
to enter the respective digit of the oscillator frequency of the
LNB used.
• Repeat the procedure by the quantity of the digits to be set.
