- 32 -
HDTV 1000 TD
• Use the
buttons to call up the stations in sequential order, then use
to activate (indicated by "
+
") or to deactivate them (indicated by
"
–
").
Factory default: All stations are deactivated.
• Press the
button.
• Set the station filters of channel strip "
B
" and "
ASI
" in the same way as
channel strip "
A
".
• To save changes and to activate the station filters press the
button.
—> The display shows "
PROGRAM Filter on
".
—> If stations are activated the corresponding PIDs (audio, video, text)
are inserted into the data stream and the PAT and SDT tables are
updated.
Test the status of the individual stations:
If the filter is switched on, press the button. In this mode you can test the set-
tings of the station filters again or change them if necessary.
• In the "
PROGRAM Filter on
" menu the station filters switched on can be
switched "
off
" using the buttons
if necessary.
Menu setting
"
A+ASI = 1 B+ASI = 2
"
"
A+ASI = 1 A+ASI = 2
".
Channel strip "
A
"
Bx 4A
Filter
PROGRAM
off
01/10
Bx 4A TV +
Das Erste
02/19
ASI TV +
ORF2
▶
• Set the channel strip "
A
" or "
B
".
—> The setting of the channel strips "
A
" and "
B
" is identical and follows
the description above.