- 24 -
HDTV 1000 TD
• Use
to select channel setting "
Channel
" or frequency setting "
Freq.
".
• Press the
button.
—> The "Output channel" or "Output frequency" – "
OUTPUT
" menu is
activated.
o
utPut
Channel
In this menu you set the output channel of the channel strip (C5 … C12, C21
… C69). Additionally the modulator of the channel strip can be switched off
or on (page 24).
Bx 4A
/B
C21
OUTPUT
on
• Use the
buttons to set the output channel.
o
utPut
frequenCy
In this menu you set the output frequency of the channel strip (42.0 … 860.0 MHz).
Additionally the modulator of the channel strip can be switched off or on (page 24).
Bx 4A
/B
850.00MHz
OUTPUT
on
• Use the
buttons to place the cursor under the digit to be set for the
frequency display then use
to set the output frequency wished.
s
witChing
the
modul ator
off
or
on
Bx 4A
/B
C21
OUTPUT
on
• To switch off the modulator place the cursor under "
on
" using the button
and switch "
off
" the modulator of the channel strip using the
buttons.
—> The switched off modulator is indicated by "
- - -
" in the display
instead of the channel or frequency display.
