- 13 -
HMM 470 / HMM 470 OIRT / HMS 470
• Press the
button.
—> The "Selecting channel / frequency setting" – "
OUTPUT Chan.
"
menu is activated.
Selecting channel / frequency setting
Bx 2A
Chan.
OUTPUT
• Use the
buttons to select channel setting "
Chan.
" or frequency setting
"
Freq.
"
.
—>
For OIRT modules select frequency setting and adjust the output fre-
quency according to the OIRT table on page 18.
• Press the
button.
—> Depending on the setting the "Setting the output channel/fine tun-
ing" or the "Setting the output frequency" – "
OUTPUT
" menu is acti-
vated.
Setting the output channel
Setting the fine tuning
In this menu you set the output channel of the channel strip. Additionally the
output frequency of the output channel can be fine tuned.
Bx 2A
C21
OUTPUT
Bx 2A
C21
OUTPUT
Fine 0
/
Setting the output channel
•
Use the
buttons to set the output channel.
Setting the fine tuning
Only change the fine tuning (frequency offset) in circumstances where it is
absolutely necessary to do so. Once you have changed it, all televisions con
-
nected to the cable system will need to be calibrated by means of fine tuning
to match it.
