- 14 -
HMM 470 / HMM 470 OIRT / HMS 470
• Press the
button.
—> Pressing the
button you can return to the "Setting the output
channel" menu.
• Use the
buttons to adjust the fine tuning (
Fine
).
• Press the
button.
—> The "Setting the output level" – "
OUTPUT Level
" menu is activated.
Setting the output frequency
In this menu you set the output frequency of the channel strip.
Bx 2A
870.00
OUTPUT
•
Use the
buttons to select the digit to be set.
•
Use the
buttons to set the output frequency (table page 17/18).
• Press the
button.
—> The "Setting the output level" – "
OUTPUT Level
" menu is activated.
Setting the output level
This menu item is used to set the output levels of the modulators of the modul´s
channel strips to the same value and to level them to the output levels of the
modulators of other modules used.
Bx 2A
Level 0 dB
OUTPUT
• Use the test receiver to measure the output level of the channel strip and
make note of the value.
• When adjusting the other channel strip, compare its value with the value
noted for the first channel strip.
• Measure the output levels of the other modulators used and make notes of
their values.
