- 15 -
PMDF 1000
s
et ting
the
e
thernet
Par a meters
In this menu you specify whether the Ethernet parameters for the cassette are
entered automatically by a connected server (“
DHCP
”), or whether you want
to enter them manually (“
stat
”). To assign the cassette uniquely, each IPTV cas
-
sette must be allocated its own IP address.
Bx 4
stat
=>
ETHERNET
Options
• Press the
buttons to select manual setting (”
stat
”) or automatic setting
(”
DHCP
”) of the Ethernet parameters.
• Press the
button to activate the setting options (”
Options
”).
—> The “Setting the IP address of the cassette” – menu “
IP-ADDR
” is
activated.
s
et ting
the
iP
address
of
the
Casset te
If you choose to enter the Ethernet parameters manually, set the IP address of
the cassette in this menu. If “
DHCP
” is selected, the “
IP-ADDR
”, “
IP-MASK
” and
“
IP-GATEWAY
” sub-menus display the parameters that were assigned automati-
cally by a connected server. If a server is not connected, “ 0. 0. 0. 0*”
appears in the corresponding menu. The star “ * ” in the display means that
the data is provided by a DHCP server.
Bx 4
192.168. 1.169
IP-ADDR
• Use the
buttons to place the cursor under the digit of the IP address
displayed to be set and use
to set the IP address wished.
• Press the
button.
—> The “Setting the address range” – “
IP-MASK
” menu is activated.
