Modifications reserved.
Specification subject to alteration.
Mounting Instructions
Cable connection
Loosen the screw from the ground
clamp and open the clamp.
Skin the cable as indicated.
All measures in mm, 1:1 scale.
Loosen the screws by several
turns on both contact plates.
Insert the cable core laterally
below the plastic pressure piece.
Retighten the screws to firmly
press the core onto the metal
contacts.
4
3
8
9
17
2
1
Input and output of the socket are
marked by corresponding arrows.
Close the ground clamp and
retighten the screw.
Insert the antenna socket into
the flush-mount wall outlet box
(or into the surface-mount frame)
and press the cable into the recess.
Align the socket in the flush-mount
wall outlet box and fix the spreader
clamps by turning in the two
screws.
Screw down the cover plate. The
marks must coincide with the cor-
responding outputs of the socket.
8
7
6
5
GSS Grundig Systems GmbH
•
Beuthener Str. 43 • D-90471 Nürnberg • http://www.gss.de
82 227 500 02ML
