- 19 -
PADA 5100
udP
Port
The UDP port setting is required if the cassette shall be controlled via LAN and
the standard port 60000 can not be used.
Bx 4
60000
UDP-PORT
• Use the
buttons to place the cursor under the digit of the port number
displayed to be set and use
to set the desired port number ("
0
" …
"
65535
").
• Press the
button.
—> The "Multiplex mode" – "
MUX-MODE
" main menu is activated.
m
ultiPlex
mode
In this menu you select the Multiplex mode.
Bx 4
MUX-MODE
manual
• Use the
buttons to select the desired Multiplex mode.
—> "
manual
" - all programme are deactivated and must be activated
in menu "Station filter" (page 29)! The SIDs remain unchanged. Only
if SIDs are present twice, they will be changed (see page 30). Using
PSW 1000 it is possible the change SIDs/PIDs manually (page 46).
"
fixed
" - all SIDs will be changed (see page 30).
"
transparent
" - Conversation from LAN ASI or ASI LAN (de-
pendent on the input and output settings). Only the input 1 signal
will be output unchanged.
If "
PC => CLEAR
" is displayed, special settings via PSW 1000 are
done before. Use button
to delete this settings!
• Press the
button.
