- 22 -
PADA 5100
• Press the button.
—> If "ASI" is selected, the "ASI transmission rate" – "
ASI RATE
" sub-
menu is activated.
—> If "LAN" is selected, the "LAN datarate" – "
LAN RATE
" submenu is
asi
tr ansmission
r ate
In this menu you set the output transmission rate for the ASI component con-
nected. For this setting please take the required information from the documen-
tation (technical data) of the ASI component to be connected.
108000 KBits
ASI RATE
• Use the
buttons to place the cursor under the digits to be set for the
transmission rate then use the
buttons to set the desired transmission
rate.
• Press the
button.
—> The "ASI options" – "
ASI OPTION
" sub menu is activated.
asi
oPtions
In this menu you define the size of the data packets, their polarity and the type
of transmission.
For this setting please take the required information from the documentation
(technical data) of the ASI component to be connected.
188 pos. cont.
ASI OPTION
• Press the
buttons to set the size of the data packets ("
188"
or "
204
" bits).
• If the polarity of the data to be transmitted has to be changed, press the
buttons to place the cursor under "
pos.
" (positive – standard) and
using the
buttons set to "
neg.
" (negative).
• To change the type of transmission press the
buttons to position the
cursor under "
cont.
" (continuous – standard) and using the
set to
"
burst
".
