- 24 -
PADA 5100
o
utPut
iP
address
In this menu you set the IP address for the IP output.
227. 40. 50. 6
OUT-IP
—> Use an IP address of the multicast range
(224.5.0.0 … 231.255.255.255 e.g. 227.40.50.x).
• Press the
buttons to position the cursor under the digit of the IP ad-
dress to be set.
• Using the
buttons set the desired IP address.
• Press the
button.
IP address within the multicast range:
—> The "Switching the IP address off or on, transmission protocol, port
number" – "
MODE / PORT
" submenu is activated (page 25).
IP address out of the multicast range:
—> The "Target MAC address" –
"DEST-MAC"
submenu is activated.
t
arget
maC
address
—> This menu will only be activated, if the an IP address was set out of
the multicast range before.
Herein you can assign the "Target MAC address" for an "Unicast" transmission
("Point to Point" connection).
Bx 4
DEST-MAC
0022B7000000
• Press the
buttons to position the cursor under the digit of the MAC
address to be set.
• Using the
buttons set the desired IP address.
• Press the
button.
