- 46 -
PADA 5100
m
ultiPlex
mode
"
m anual
"
Herein you can filter out stations (services) and manually rename SIDs/PIDs.
—> All stations (services) are deactivated and, if required, must be reac-
tivated by the check boxes.
a
Ctivating
s
tations
(
serviCes
)
• Activate the check boxes of all stations, which shall be output.
—> The PIDs, which correspond to the stations are also activated, but
can be deactivated again.
—> In section "Overview filter settings" all activated stations of all in-
puts, as well as the manually deactivated PIDs are listed.
C
hanging
sid
s
/Pid
s
"
m anually
" (
only
in
"m
ultiPlex
mode
m anual
")
• The corresponding check box must be activated.
• Click on the component you would like to change.
—> The button
resp.
is activated.
• Click on button
resp.
.