- 47 -
STI 1932 CT
- P
ing
(n
et work
d
iagnostiC
t
ool
):
347
You can use the Ping button to check whether a device is accessible
on the network (also in the network to which you are connected via
OpenVPN).
• Select the interface via which the ping is to be sent.
(configuration interface = eth0; streaming interface = eth1)
• Enter the IP address you want to "ping" and click the
Ping
button.
u
ser
In section User you can adjust the location-based data that is displayed in the
header of the menus accordingly. If you remotely manage multiple head-end
stations, you know at any time, at which station you just work.
In the Notes field you can enter any text that will be displayed in the overview
as a reference.
—> Before leaving the menu, changes must be transferred to the head-
end station! Therefore click on button
.
—> After that
is displayed for a short time in the upper right corner.
