- 38 -
STI 1932 CT
n
otifiCation
In this menu you use the reaction time to set when entries for input signal or
data overflow errors are entered in the logbook (page 37).
Enter the access data for the outgoing mail server of your e-mail account here
if you want to be informed about error entries in the logbook (e.g. power sup-
ply/fan failure, missing input signal, etc.) by e-mail. The e-mail is then sent via
the outgoing mail server of your e-mail account to the inbox of the recipient.
You can also enter the address of a central syslog server here in order to have
the logbook entries sent there.
—> Therefor the configuration interface must have access to the Internet.
312
314
316
313
317
310
311
315
318
320
319
321
310
Enter the duration in seconds that an input signal or data overflow error
must occur for an entry to be made in the logbook.
311
Enter here the duration in seconds which must be a signal "OK" again
for an entry to be made in the logbook.
312
Herein enter the e-mail address to transmit the e-mail.
313
Herein enter the password for the outgoing mail server of your e-mail account.
314
Herein enter the outgoing mail server of your e-mail account.
315
Herein enter the port of the outgoing mail server of your e-mail account.
