- 41 -
STI 1932 CT
o
Pen
vPn
Via our VPN server you can get worldwide access to the head-end station by
an OpenVPN connection. Since the connection is made through our server,
you do not need a fixed external IP address or a dynamic DNS access.
—> In order that the OpenVPN connection works the following require-
ments must be fulfilled:
–
Your PC must have access to the Internet.
–
The configuration interface must have access to the Internet (already at the
system start).
–
The outgoing TCP Port 1194 must be opened (e.g. at the router).
• Open menu
System > OpenVPN
.
• Copy the "
Personal Link
"
http://…
into the address line of your browser
and store it as favourite.
• As there is no Internet connection at the system start for the initial configura-
tion, you need to reboot the device after configuration (System> Firmware>
Restart).
—> If there is no Internet connection at the system start, the OpenVPN
service is deactivated temporarily.
—> The Private Link is also included in the protocol file (page 18)!
—> Via the ON/OFF button you can deactivate the OpenVPN service.
—> Before leaving the menu, changes must be transferred to the head-
end station! Therefore click on button
.
—> After that
is displayed for a short time in the upper right corner.
