- 45 -
STI 1932 CT
—>
Aborting the firmware update or interrupting the power supply dur-
ing the update might in worst case result in a defect of the device!
—> During the update this warning is
displayed.
After a few minutes the LEDs be-
come off, shortly after that the LED
for line 1 flashes (update is being installed).
—> After a successful update, the following message is displayed:
The head-end station then restarts.
- b
aCkuP
:
337
Via button
Save settings to PC
you can download the settings from the
head-end station as "*.tar" file for backup.
—> Settings
including password
but
without network settings
.
338
Via button
Load settings from PC
you can restore the settings from a prior
downloaded backup.
- m
anager
:
In the Manager, you can save configurations in the head station.
339
Enter a name and save the configuration with the
Save actual config
but-
ton.
Load a configuration stored in the manager:
340
In the "Saved configurations:" field, select a saved configuration and load
it with the
Load config
button.
Delete a configuration stored in the manager:
341
In the "Saved configurations:" field, select a saved configuration and de-
lete it with the
Delete config
button.
