8
TROUBLE SHOOTING
If ......
It might be caused by ......
No indication light when power "on"
Cable/terminal block is loose
Broken circuit of fuse; or automatic switch in your house
Power supply stopped.
Heating indicator does not light-in,
Unsuitable cooking utensil,
Appliance fails to heat up
Utensil isn't located at the center properly.
Utensil is smaller than 5cm.
Over-heating protection is activated.
Appliance suddenly stops heating
during operation
High ambient temperature.
Air entrance or outlet blocked.
Over-heating protection activated.
ERROR CODE, verified by BEEPER
If the machine turned-off itself, please check if you can hear BEEP as following descriptions:
If
It might be caused by,
Bi--------(1 long BEEP)
Bibibibi (4 short BEEP)
Over-voltage protection,
Action:
Try again later till electricity supply is
stable
Turn-off immediately without any sound 1. Over-heating protection, or
Action:
Try again later after the machine has
cooled down
2. Surge protection
Action:
Try again immediately.
Bibibibibi… (short BEEP last for
60seconds)
Bi--------(1 long BEEP)
No pan on the cook-top
Bi----------(1 long BEEP)
Bibibibibibibibibi (9 short BEEP)
Heating empty pan on the cook-top,
Action:
Remove the empty pan, or fill with
food/water as you want.
Bi----------(1 long BEEP)
Bibi (2 short BEEP)
Temperature sensor failed (open or short),
Action:
Call your local distributor for service
information.
1. If your induction range seems to be working improperly, it doesn't necessarily mean it is faulty. In
all cases, check the preceding points.
2. If you fail to identify the problem, contact your after-sales service center without delay.
Contact:
GSW Service Center
4151 NE Port Drive
Lee’s Summit, MO 64064
800-458-1716
