background image

 

GT-SL1 

5-Year Limited Warranty               

 

     

This GT-Lite Lighting fixture carries a limited warranty against defects in material or workmanship. If the GT-Lite 
Lighting product fails at any time within five (5) years after the original date of sale due to defects in material or 
workmanship, return the product to GT-Lite with the original sales receipt. At its discretion, GT-Lite Lighting will 
replace the defective fixture with the same or similar fixture or issue a refund. This warranty and any implied warranty 
(including but not limited to any implied warranty of merchantability or fitness for a particular purpose) does not cover 
glass globes, light bulbs and other expendable items. This warranty excludes coverage of finish or color against 
tarnishing, flaking, and discoloration. 

If the original purchaser ceases to own the GT-Lite Lighting product this warranty and any implied warranty will be 
void. 

This warranty does not cover damage caused by misuse or abuse, including but not limited to improper installation, 
improper usage, accident, negligence, unauthorized repair, unauthorized modifications, or unauthorized maintenance 
of the fixture. This warranty does not include reimbursement for inconvenience, installation, setup time, returned 
shipping charges or defects, losses, labor, injuries to personal property. 

This warranty gives the consumer specific legal rights, and the consumer may have other rights which vary from 
state to state. The seller’s employees are not qualified to advice on the use of the fixture. Any oral representations 
made will not be binding on seller or its employees. 

For questions regarding this product, please contact GT-Lite at 1-800-865-6799 

 

Summary of Contents for GT-SL1









Reviews: