21
9. Cell meter test program
10. Data save program
User Program
Cell Meter
This charger with built-in high-bit micro-processor, can be
used as a cell meter.It can show the voltage of each cells, the
total battery pack voltage and the highest/lowest voltage.
Choose the cell meter program interface, press
START
to
enter.
press
START
to show 1-4 cells voltage. Press
STOP
key back
to main menu.
Press
START
key to show the highest/lowest voltage of the
single cell and the total voltage of the battery pack.
It has a data storage and load program, can store up to 10
battery data by number that represent the individual
specification of the batteries you are using. They can be
called back for charging/discharging process without
setting the program again.
press
ENTER
key to save data.
Set the battery parameters in the battery type program you
need to save. Use 3s lipo battery as example, you need
choose Lipo charge program first, then set lipo battery
parameters, after parameter set finished, exit this program
and select data saving program. Select the shortcut number
that you want to save for the next time use, then press
ENTER
key enter into the data saving interface.
MAIN:16.79V
H:4.20V L:4.19V
1:4.20V 2:4.19V
3:4.20V 4:4.20V
Save[1] BALANCE
LiPo 4S 2.2A
Cover Previous
Memory[1]? NO YES
PROGAM SELECT
SAVE DATA
Start
Enter
Start
Enter
Start
Enter
Start
Enter
Summary of Contents for X2mini
Page 16: ......
