User Manual
7100 Low Flyer
-I
GTM- 7100-MAN-001 (2) Page 9 of 11
STORING
Store your hand rim so that they are protected from dangerous conditions.
Do not
position them near any heat or open flame sources.
Ultraviolet radiation from the sun can fade the resin systems of the hand
rim.
Do not
rest the hand rim on shape edges as this may puncture the hand
rim.
CLEANING
Clean your hand rims with a soft, moist cloth and a solution of dish soap
and water.
Do not
use industrial solvents or harsh chemicals that can damage the
material.
Do not
use high-pressure water.
INCIDENTAL DAMAGE
If the hand rim is scratched or impacted, the surface of the hand rim must
be inspected immediately, as the damaged sustained may cause serious
injury. See Table 1 for a guideline as to the actions required:
Condition
Inspection
Action
a. Surface scratches < 0.5 mm Visually check if there are
sharp edges or loose fiber
ends
If required, lightly polish
only the sharp edge with
3000 grit water paper.
b. Gouges >0.5 mm
Visual
Return the hand rim to
your authorized dealer for
inspection.
c. Cracks, de-laminations and
punctures
Visual
Return the hand rim to
your authorized dealer for
inspection.
Table 1: Incidental damage and actions
General Servicing and Care
