Chapter 6 Specification of Parameters GK600 User Manual
- 174 -
Fig. 6-37
2: Center point is (C3-09)/2, and the corresponding parameter value is positive when frequency
is lower than center point. The value that corresponds to DO pulse frequency at center point
is 0. When set to 0, DO pulse corresponds to the positive maximum value, while when set to
C3-09, DO pulse frequency corresponds to the negative maximum value. See Fig. 6-38:
Fig. 6-38
C3-11
DO output filtering time
Range: 0.00s~10.00s
Factory default:
0.00s
Set the filtering time of DO high-speed pulse output. Filtering can change the changing rate of
output pulse frequency. The longer the filtering time is, the lower the change rate of output
pulse frequency would be.
DO
对应表示量
DO
脉冲频率
0
C3-09
(C3-09) / 2
表示量正最大值
表示量负最大值
DO
对应表示量
DO
脉冲频率
0
C3-09
(C3-09) / 2
表示量负最大值
表示量正最大值
DO corresponding value
Maximum corresponding value
DO pulse frequency
Maximum negative corresponding value
Do corresponding value
Maximum corresponding value
Maximum negative value of indication
value
DO pulse frequency
Maximum negative corresponding value
