No
. 96-1886-01E
Rev
.
1.1
GTECH Aircon Radio (Model GWT154)
PAGE
64
OF
72
05 00 94 20 00 00 00 00 FE FF
00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 4F 04
Set Mode
05 00 01 01 40 BE 04
06
05 00 81 00 7F 04
9.3
Coordinator
Configuration
–
Get
End
Device
Statistics
After a PAN has been created, and the network configuration parameters saved persistently in all
devices, the Terminal/Host may acquire wireless link signal strength and quality information from all
End Devices in the network. An End Device radio is selected by addressing the Peripheral wired to it.
Once selected, the Coordinator – End Device link is maintained until the Terminal/Host addresses a
different Peripheral.
Link quality and End Device 802.15.4 addressing may be obtained from the currently selected
Peripheral End Device using a Ping diagnostic message.
Select Peripheral address
Send Ping
Get Ping Response
9.3.1
Select
Peripheral
Address,
Send
Ping
Send Ping: Coordinator RSSI 0, Coordinator LQI 0, End Device RSSI 0, End Device LQI 0, End
Device Transmit Power 0, End Device Short Address 0, End Device EUI-64 0.0.0.0.0.0.0.0, Test Data
0x30, 0x31 to 0x5F.
Get Ping: Coordinator RSSI 207, Coordinator LQI 89, End Device RSSI 223, End Device LQI 134,
Transmit Power 15, Short Address 0x0001, EUI-64 0.18.75.0.1.26.56.37, Test Data 0x30, 0x31 to
0x5F.
