102
Pruning
Cut up from the bottom, finish down from the top.
1. Do not use an unstable foothold or a stepladder.
2. Do not overreach.
3. Do not cut above shoulder height.
4. Always use both hands to grip the saw.
The Spiked bumper must always be put on while
using the chain saw on tree trunk. Push the spiked
bumper into the tree trunk by using the rear handle.
Push the front handle in the direction of cutting line.
The spiked bumper must be remaining set for
further saw guiding if necessary.
Use a spiked
bumper when cutting trees and thick branches can
ensure your safety and decrease the working
strength and vibration level.
If there’s barrier between the cutting material and
chainsaw, turn off the machine. Wait until it stops
completely. Wear the safety glove and remove the
barrier. If the chain must be removed, please follow
the instruction of relevant part like installation in
manual. A trial run must be conducted after the
cleaning and newly installation. If vibration or
mechanical noise is discovered, please stop the use
and contact your dealer.
Summary of Contents for GTC56
