90
●
Do not rely exclusively on the safety devices built into your saw. As a chain saw user
you should take several steps to keep cutting jobs free from accident or injury.
(1) With a basic understanding of kickback you can reduce or eliminate the element of
surprise. Sudden surprise contributes to accidents.
(2) Keep a good grip on the saw with both hands,
the right hand on the rear handle, and the left
hand on the front handle, when the engine is
running. Use a firm grip with thumbs and fingers
encircling the chain saw handles. A firm grip will
help you reduce kickback and maintain control of
the saw. Don’t let go.
(3) Make certain that the area in which you’re
cutting is free from obstructions. Do not let the
nose of the guide bar contact a log, branch, or
any other obstruction which could be hit while
you are operating the saw.
(4) Cut at high engine speeds.
(5) Do not overreach or cut above shoulder
height.
(6) Follow manufacturers sharpening and
maintenance instructions for saw chain.
(7) Only use replacement bars and chains
specified by the manufacturer or the equivalent.
Summary of Contents for GTC56
