LPA 3000XLS/3200XLS Instruction Manual
27
Set Control Board for Push-To-Open
Make sure the control box power switch is OFF. Use a small screwdriver to
move the Number 3 DIP switch from the factory setting (OFF / Pull-To-Open)
to ON for Push-To-Open. Turn power switch ON. The control board is now
configured to push the gate open.
Setting the Open Position Limit (Push-To-Open Installations)
ON
OFF
DIP#3
ON
Push-to-open operation.
OFF Pull-to-open operation (factory setting).
1
ON
2 3 4
1 2 3 4
ON
OFF
SOFT ST
AR
T OFF
W
ARNING OFF
OPEN PULL
2ND OPEN DL
Y.
MODE1 OFF
MODE2 OFF
ON
ON
PUSH
SIMUL
T.
ON
ON
120
MIN
MA
X
A
UT
O CL
OSE
TIME
ST
ALL FOR
CE
1 2 3 4
ON DIP
SOFT ST
AR
T OFF
W
ARNING OFF
OPEN PULL
SL
V OPEN DL
Y.
MODE1 OFF
MODE2 OFF
ON
ON
PUSH
SIMUL
T.
ON
ON
120
MIN
Set Control Board for Push-To-Open
Make sure the control box power switch is OFF. Use a small screwdriver to
move the Number 3 DIP switch from the factory setting (OFF / Pull-To-Open)
to ON for Push-To-Open. Turn power switch ON. The control board is now
configured to push the gate open.
Setting the Open Position Limit (Push-To-Open Installations)
Step 1
Power switch is on, gates are in the
CLOSED position, operator
arms fully retracted.
Gates in
CLOSED
Postion
Control
Box
Master
Gate
Operator
Second
Gate
Operator
Step 2
Press the transmitter to activate operator
arms. The gates will begin to open.
Gates
Opening
Control
Box
Step 3
When either gate reaches OPEN position,
press transmitter to stop the gates.
A. If the
master gate
reaches open postion
first - press and hold LEARN MAST LIMIT
for 5 seconds, or until buzzer beeps to
set open postion.
B. If the
second gate
reaches open postion
first - press and hold LEARN 2ND LIMIT
for 5 seconds, or until buzzer beeps to
set open postion.
Learn Master
Limit Button
1 2 3 4
ON
DIP
STATUS
LEARN RMT
LEARN
MAST LIMIT
LEARN
2ND LIMIT
S3
S4
S2
SOFT START OFF
WARNING OFF
OPEN PULL
SLV OPEN DLY.
MODE1 OFF
MODE2 OFF
ON
ON
PUSH
SIMULT.
ON
ON
120 MIN
MAX
AUTO CLOSE TIME
STALL FORCE
Learn 2ND
Limit Button
Learn Master
Limit Button
1 2 3 4
ON
DIP
STATUS
LEARN RMT
LEARN
MAST LIMIT
LEARN
2ND LIMIT
S3
S4
S2
SOFT START OFF
WARNING OFF
OPEN PULL
SLV OPEN DLY.
MODE1 OFF
MODE2 OFF
ON
ON
PUSH
SIMULT.
ON
ON
120 MIN
MAX
AUTO CLOSE TIME
STALL FORCE
Learn 2ND
Limit Button
A
.
B
.
Gates in
OPEN
Postion
Control
Box
Master Gate A
in the Open
Position
Follow B directions if
second gate reaches
open position first.
Step 4
Press the transmitter to CLOSE the
gates. Gates will close fully. The gate in
Step 3A or 3B is now
programmed.
Gates in
CLOSED
Postion
Master
Gate
Operator
Second
Gate
Operator
Control
Box
Master
Gate
Operator
Second
Gate
Operator
ON/O
FF
