ii
LPA 3000XLS/3200XLS Instruction Manual
Thank you for purchasing a Linear PRO Access 3000XLS/3200XLS. When correctly installed and properly
used, your LPA 3000XLS/3200XLS operators will give you many years of reliable service. Please read the
following information to ensure you have the correct system for your particular needs. This manual will
enable you to properly install your 3000XLS/3200XLS Automatic Gate Operators.
The 3000XLS/3200XLS operators are designed for installation on pull-to-open dual leaf gates. The gates
must not exceed 16 feet in length nor weigh more than 650 pounds* per leaf (please see Technical
Specifications on page 1). The 3000XLS/3200XLS operators can be used on vinyl, aluminum, chain link,
farm tube, and wrought iron gates.
Use on solid (wood) gates is not recommended. Solid surface gates
have a high resistance to the wind. If the wind is strong enough, the operators will obstruct, stop, and
blow fuses.
The 3000XLS/3200XLS can be installed on push-to-open gates with the addition of two (2) push-to-open
brackets
[R4388].
The 3000XLS/3200XLS operators accommodates extra transmitters, digital keypads, solar panels, push
buttons, automatic gate locks, and other access control products.
These optional accessories are noted
with the
symbol.
The 3000XLS/3200XLS operators feature
adjustable stall force
. This safety feature makes the gates stop
and reverse direction within two seconds when it comes in contact with an obstruction. The “MIN” setting
means the gate will exert the minimum force on an obstruction before it stops and reverses direction.
The 3000XLS/3200XLS operators also have an
adjustable auto-close
feature. After the gates reach
the fully open position, they can be set to remain open from 3 to 120 seconds before automatically
closing. Pressing the transmitter button at any time after the gates fully open will cause them to close
immediately. “OFF” is the factory setting; meaning the gates will stay open until you press the transmitter
button (or keypad, etc.) again.
Please call Linear PRO Access at (800) 543-4283 for more information about our professional line of gate
operators and accessories. Our Sales Department will be glad to give you the name and phone number of
a Linear PRO Access dealer near you.
BEFORE YOU BEGIN TO INSTALL YOUR AUTOMATIC GATE OPERATORS:
Read these instructions carefully and completely to become familiar with all parts and installation
steps. You must read the installation manual for detailed instructions on gate operators safety
and proper use of the gate operators.
24/7 Troubleshooting Wizard: http://support.gtoinc.com
Please Read This First
GTO Accessories are noted with this symbol in this Installation
Manual. Information about accessories can be found on page 32
and at
www.linearproaccess.com
.
