6
1234
ON
SECOND OPERATOR
FIRST OPERATOR
POWER IN
ALARM ACCESSORY
RCVR
PULL/PUSH
SNGL/DUAL
SEQ1
SEQ2
LEARN
18VAC SOLAR
~ ~ –
+
RED
BLK
ORG
BLU
GRN
CLS EDG
OPN EDG
RED
BLK
BLU
ORG
ORG
BLU
WHT
GRN
GRN
CLS EDG
OPN EDG
R G B
Power Cable
from First Operator
RED Wire To Battery
Positive (
+) Terminal
RED Wire From Lock
BLACK Wire From Lock
WHITE Wire to
BLK OPERATOR Terminal
BLACK Wire To Battery
Negative (
–) Terminal
1 2 3 4 5
Lock Board
Time Adj
MIN
MAX
The 3M
®
Scotch Loc Connector is not needed with the Generation 2000 control board (i.e., Mighty Mule
®
,
GTO/PRO 1000, and GTO/PRO 2000 openers with serial numbers. Connect the WHITE wire from the lock board
directly to the OPENER terminal block along with the power cable wire. Connect the WHITE wire to the BLACK
terminal for a Pull-to-Open installation (see illustration below), connect WHITE wire to the RED terminal for a
Push-to-Open installation. Proceed to Step 5 and connect the remaining wires as described.
Generation 2000 Control Boards (Mighty Mule
®
, GTO/PRO
1000, and GTO/PRO 2000 openers with serial numbers)
