9
1. To set the Time-On from 0-60 seconds disconnect
the jumper (X2) on the control board. Using a small
screwdriver, turn the potentiometer to the time you
desire between 0-60 seconds. See
Figure 14
.
Programming the Light Kit
Adjusting the Time-On Delay:
The Light’s Time-On can be set to leave the lights on from 0-120 second from the time the gate stops.
x2
DEL
AY
TIMER
0
60
Potentiometer set
between 0-60
seconds
Figure 14
Jumper X2 is
disconnected
x2
DEL
AY
TIMER
0
60
Figure 15
Potentiometer set
between 60-120
seconds
Jumper X2 is
connected
2. To set the Time-On from 0-120 seconds connect the
jumper (X2) on the control board. Using a small screw-
driver, turn the potentiometer to the time you desire
between 0-120 seconds. See
Figure 15
.
In order to test the light kit in the day light, place a piece of black electrician’s tape over the photocell lens then
wait for 2 minutes. Activate the gate operator by pressing the gate operator’s transmitter button or another activa-
tion device.
The lights should come on when the gate is activated and go off at the time delay you have set.
If any of these actions did not occur, please call GTO Technical Service at 1-800-543-4283 for additional informa-
tion.
When everything is working correctly, replace all connection covers, remove the electrician’s tape and your done.
Testing the Light Kit:
Features and Technical Specifi cations:
• 12 Vdc systems only.
• Maximum load: 20 Watts / 2-10 Watt bulbs.
• Built-in overload protection with re-set able poly fuse. This feature prevents the load
(bulbs) from drawing more than 3 Amps from the battery.
• Built-in battery reversal protection with re-setable poly fuse.
• Low battery condition monitor: If the motor voltage is below 9V the lights will not acti-
vate, conserving battery power for the operator.
• Potentiometer adjustable time delay from 0 - 120 seconds.
• Day light photocell (sensor) disables light during day light.
The GTO, Inc. Technical Service Department is open
Monday – Friday 8:00 A.M. – 5:00 P.M. (Eastern Time)
For technical service Call toll free: 1-800-543-1236
For sales call toll free: 1-800-543-GATE (4283)
