37
Solar Panel (FM121)
Not Compatible with Mighty Mule® 250
The
Solar Panel
is a 5 watt solar powered battery charger for use with the
FM500 & FM502
gate opener systems.
Particularly suited for remote installations, each
Solar Panel
comes with tubular steel support, mounting clips, wire
connectors, and 8 ft. of low voltage wire (see Low Voltage Wire for additional wire). The
Mighty Mule®
control board
has clearly labeled terminal connections for easy installation of the
Solar Panel
. Installation in some regions of the
world will require multiple solar panels for adequate charging power. Dual gates require a minimum of 10 watts of
solar charging power. (10 watt solar panels are available)
Push Button (doorbell) Control (FM132)
Unlit doorbell button for remote entry or exit control. Wires directly to the control board and uses 16 gauge multi-
stranded, dual conductor low voltage wire (sold separately).
Pin Lock (FM133)
The
Pin Lock
substitutes for the clevis pin at the front end of the Mighty Mule® gate openers. Helps prevent theft of
the opener from the gate, while allowing quick release of the opener.
Key Chain Mini Transmitter (FM134)
The Key Chain Mini Transmitter is a miniature version of the
Mighty Mule®
entry transmitter and has the same
adjustable code settings. 12 Volt battery included.
Entry Transmitter (FM135)
The
Mighty Mule®
entry transmitter, with adjustable code settings, is standard equipment with all
Mighty Mule®
systems. 9 Volt battery included.
Digital Keypad (FM137)
The specially designed digital keypad can be easily installed as a wireless or wired keypad. It can be programmed to
use up to 25 different personal identifi cation number (PIN) codes. Each code is face programmable with additional
security features built in. Wired installations require 16 gauge, low voltage, multi-stranded, dual conductor, direct
burial wire (sold separately). Requires 3 AA batteries (not included).
Gate Opening Sensor (FM138)
Not Compatible with Mighty Mule® 250
The Gate Opening Sensor is designed for residential and agricultural applications and is compatible with most Mighty
Mule® automatic gate opener models (see Sensor Box for model compatibility). The Sensor is an electromagnetic
sensor, which offers 'hands free' operation of the Mighty Mule® Gate Opener with a 12 ft. radius of detection of
vehicles in motion.
Automatic Gate Lock Pull-to-Open (FM143)
Not Compatible with Mighty Mule® 250
A MUST for added security. Solenoid driven with a steel housing. Unlocks and locks automatically as gates open and
close. Used with the
Mighty Mule®
system for maximum stability and security. Comes with a keyed manual release.
Recommended for gates over 8 ft. long. Ideal for animal enclosures or high wind areas.
Wireless Entry Intercom / Keypad (FM136)
Allows owner to screen guest at the gate before allowing access to the property. Keypad also allows owner to give up to
25 programmable entry codes to family, friends or approved delivery personnel. Codes can be permanent of temporary.
Can be wireless or hard wired up to 1000 feet.
Gate Opener Light Kit with Digital Controller (FM124)
The light kit’s control board and the daylight sensor integrate the two low voltage lights with the existing gate opener,
allowing the lights to come on when the driveway gate is opened and shut off after the gate closes, at night. Lights can
be face mounted or mounted on top of the gate posts.
AUT
OMA
TIC
GAT
E LO
CK
®
ELECTRO
NIC SEC
URITY
LOCK
Accessories are Available From Your Retail Store
®
E-Z GATE OPENERS
ACCESSORIES
POW
ER
Key
pad
Bat
t Lo
w
Gran
t
Perm
issio
n
An
sw
er
DV 9V
ACC
ES
S CONTR
OL
SYS
TE
MS
1-
80
0-5
43
-4
28
3
1
2
ABC
3
DEF
4
GHI
5
JKL
6
MNO
7
PRS
8
TUV
9
WXY
0
