PLEASE READ THIS FIRST!
iii
Thank you for purchasing the
GTO/PRO® 3000/3200
gate operator system
.
When correctly installed and properly
used, your
GTO/PRO® 3000/3200 Operators
will give you many years of reliable service. Please read the following
information to ensure you have the correct system for your particular needs. This manual will enable you to properly
install your
GTO/PRO® 3000/3200 Automatic Gate Operators
.
The
GTO/PRO® 3000/3200 Operators
are designed for installation on a
pull-to-open dual leaf gates
(gates
that open
into
the property). By purchasing an
accessory bracket
, the
GTO/PRO® 3000/3200 Operators
can
accommodate
push-to-open
dual leaf gates (
gates that open
out
from the property). The gates must not exceed 16
feet in length (per leaf) nor weigh more than 650 pounds (per leaf) (please see
Technical Specifications
on page 11).
The
GTO/PRO® 3000/3200 Operators
can be used on vinyl, aluminum, chain link, farm tube, and wrought iron
gates. Use on solid (wood) gates is not recommended. Solid surface gates have a high resistance to the wind. If the
wind is strong enough, the operator will obstruct and stop.
The
GTO/PRO® 3000/3200 Operators
accommodate extra transmitters, digital keypads, solar panels, push buttons,
automatic gate locks, and other access control products. These optional accessories (see the enclosed
GTO/PRO®
Accessory Catalog
) are available.
The
GTO/PRO® 3000/3200 Operators
feature
adjustable obstruction sensing.
This safety feature makes the gates
stop and reverse direction within 2 seconds when they come in contact with an obstruction.
MIN
is the factory setting;
meaning the gates will exert the minimum force on an obstruction before they stop and reverse direction.
The
GTO/PRO® 3000/3200 Operators
also have an
adjustable auto-close feature
. After the gates reache the fully
open position, they can be set to remain open up to 120 seconds before automatically closing. Pressing the transmitter
button at any time after the gates open fully will cause them to close immediately.
OFF
is the factory setting; meaning
the gates will stay open until you press the transmitter (or keypad, etc.) again.
Please call GTO at
(800) 543-GATE [4283]
or
(850) 575-0176
for more information about our
GTO/PRO®
professional line of gate operators and accessories. Our Sales Department will be glad to give you the name and phone
number of a
GTO/PRO®
dealer near you.
BEFORE YOU BEGIN TO INSTALL YOUR AUTOMATIC GATE OPERATOR:
Read these instructions
carefully and completely
to become
familiar with all parts and installation steps.
You must read the installation manual for detailed instructions on
gate operator safety and proper use of the gate operator.
®
DC-SERIES
®
DC-SERIES
