25
MAINTENANCE
Maintenance Schedule:
Test the gate operator, accessories, and safety devices monthly.
Service the gate operator, accessories, and safety devices regularly.
Maintenance Checklist
Test the safety edges (Grasp edges and squeeze).
Check the obstruction settings (in both open and close modes).
Check for wear on all moving parts, and tighten bolts as necessary.
Check the gear box for any sign of oil leakage. If the gearbox is leaking, call the GTO Service Department for
assistance. DO NOT ADD OIL!
Check hinges on the gate and lubricate if needed.
Check for loose or corroded wires.
Clean and grease the upper and lower splines twice per year.
Make sure the warning signs (see page 7) are installed.
WARNING: ALWAYS TURN OPERATOR OFF BEFORE
ADJUSTING OR SERVICING IT.
Grease Spline
Gear Reducer
NOTES: [1] Always use the proper lubricant for your area. Check the temperature range of the lubricant; lubricant
with an improper temperature range may cause the unit to stop operating or cause an obstruction condition.
[2] In extremely cold climates, maintain the proper operating temperature of the unit by installing heat tape around
the gear reducer (see illustration below).
