22
ON
OFF
1
ON
DIP
2
3
4
1
2
3
4
O
N
D
IP
STATUS
LEARN RMT
LEARN
MAST LIMIT
LEARN
SLV LIMIT
S3
S4
S2
OFF
SOFT START OFF
WARNING OFF
OPEN PULL
SLV OPEN DLY.
MODE1 OFF
MODE2 OFF
ON
ON
PUSH
SIMULT.
ON
ON
120 MIN
MAX
1
2
3
4
O
N
D
IP
L
LEARN
MAST LIMIT
LEARN
SLV LIMIT
S
S4
S2
OFF
SOFT START OFF
WARNING OFF
OPEN PULL
SLV OPEN DLY.
MODE1 OFF
MODE2 OFF
ON
ON
PUSH
SIMULT.
ON
ON
120 MIN
MAX
L
S3
1
2
3
4
O
N
D
IP
OFF
OFF
PULL
DLY.
OFF
OFF
ON
ON
PUSH
SIMU
ON
ON
120 MIN
DIP Switches
CONTROL BOARD SETTINGS
Auto Close Time Pot
1
2
3
4
O
N
D
IP
STATUS
LEARN RMT
LEARN
MAST LIMIT
LEARN
S3
S2
OFF
SOFT START OFF
WARNING OFF
OPEN PULL
SLV OPEN DLY.
MODE1 OFF
MODE2 OFF
ON
ON
PUSH
SIMULT.
ON
ON
120 MIN
MAX
AUTO CLOSE TIME
STALL FORCE
Main DIP Switch Settings (MODES)
DIP Switch #1 - Soft Start/Stop
ON -
Soft start enabled (factory preset).
OFF -
Soft start disabled.
The Soft Start/Stop feature slowly starts the
gate as it begins to open and slows the gate as it
comes to the closed position. This saves wear and
tear on the gate and gate opener system.
DIP Switch #2 - Warning Buzzer
ON -
Buzzer warning enabled (factory preset).
OFF -
Buzzer warning disabled.
The Warning Buzzer alerts you when the gate
opener is beginning to either open or close the
gate. It sounds for the first 2 seconds in each
direction. It also sounds a warning when the gate
obstructs two times in one cycle. Switching this
to OFF only disables the open and close warning
not the obstruction warning.
DIP Switch #3 - Push/Pull-to-Open
ON -
Push to open.
OFF -
Pull to open (factory preset).
If your gate opens into the property the DIP
Switch is set to the OFF position (factory
setting). If your gate opens out from the property
the DIP Switch must be set to the ON position.
NOTE: if you have a Push-to-Open gate
application you will need a Push-to-Open bracket
(see Push-to-Open Instructions on page 3).
DIP Switch #4 - Dual Operation
ON -
Slave opens simultaneously with master.
OFF -
Slave opens after master.
Note: Not applicable for single gate operator.
Auto Close
The 'AUTO CLOSE TIME' pot controls
auto close feature.
Turning the pot all the way counter-clockwise
will turn auto close feature off. The minimum
auto close time is 3 seconds. The maximum
(turn the pot all the way clockwise) auto close
time is 20 seconds.
