gtt systems GTTS-2000B Installation Manual Download

gtt systems GTTS-2000B, Installation Manual

The GTT Systems GTTS-2000B installation manual is an essential resource for setting up and configuring your GTTS-2000B system. This comprehensive manual is available for free download from our website, providing step-by-step instructions and valuable insights to ensure a hassle-free installation process.

Page: 2 / 2

2.3.2 Installation with screw mounting

If the GTTS-2000B should be installed using 4 pieces M5 bolts, the bolts shall not be longer then 18mm plus
the steel surface thickness.
Drill 4 holes Ø 5,5 mm according the drill plan. See figure below

X is steel surface thickness

Bolt M5 maximum length is X+18 mm

Make sure that bottom center touches steel.

The ferro sensor is located at this position.

Summary of Contents for GTTS-2000B

Page 1: ...o confirm the unit is switched on and working properly Please note that it can take several minutes before a message from the unit is received depending on satellites in sight GPS takes typically 40 50 seconds for a cold start fix Latency in the Iridium Network is very low Typical values measured 12 15 seconds When the GTTS 2000B is removed from ferrous metal it will be triggered to send a sabotag...

Page 2: ... bolts the bolts shall not be longer then 18mm plus the steel surface thickness Drill 4 holes Ø 5 5 mm according the drill plan See figure below X is steel surface thickness Bolt M5 maximum length is X 18 mm Make sure that bottom center touches steel The ferro sensor is located at this position ...

Brands by name

Search results

Summary of Contents for GTTS-2000B

Reviews:

Related manuals for GTTS-2000B

Brands by name

Popular brands