3
CAUTION:
USAGE OF CONTROLS OR ADJUSTMENTS OR PERFORMANCE OF PROCEDURES OTHER THAN THOSE
SPECIFIED HEREIN MAY RESULTE IN HAZARDOUS RADIATION EXPOSURE.
THIS UNIT SHOULD NOT BE ADJUSTED OR REPAIRED BY ANYONE EXCEPT QUALIFIED SERVICE
PERSONNEL.
WARNING:
-
THE APPARATUS SHALL NOT BE EXPOSED TO DRIPPING OR SPLASHING AND THAT NO
OBJECTS FILLED WITH LIQUIDS, SUCH AS VASES, SHALL BE PLACED ON THE APPARATUS.
-
THE MAINS PLUGS OR AN APPLIANCE COUPLER IS USED AS THE DISCONNECT DEVICE, AND
THE DISCONNECT DEVISE SHALL REMAIN READILY OPERABLE.
PRECAUTIONS FOR USE
INSTALLATION
UNPACK ALL PARTS AND REMOVE PROTECTIVE MATERIAL.
DO NOT CONNECT THE UNIT TO THE MAINS BEFORE CHECKING THE MAINS VOLTAGE AND BEFORE
ALL OTHER CONNECTIONS HAVE BEEN MADE.
DO NOT COVER ANY VENTS AND MAKE SURE THAT THERE IS A SPACE OF SEVERAL CENTIMETERS
AROUND THE UNIT FOR VENTILATION.
CONNECTION
1. CONNECT THE EXTERNAL POWER ADAPTOR WITH
EXTERNAL POWER ADAPTOR SOCKET.
2. PLUG THE UNIT INTO A SUITABLE MAINS SOCKET
3. SWITCH ON THE TURNTABLE BY
ON / OFF SWITCH
.
OPERATION
INSTALL THE DUST COVER INTO HINGE ON THE UPPER CABINET.
-
SET THE TURNTABLE PLATTER ONTO THE CENTER SPINDLE.
-
PLACE THE SLIP MAT ON THE TURNTABLE PLATTER.
-
SLIDE
WEIGHT
-
COUNTER
ONTO THE TONEARM. TWIST IT LIGHTLY AND IT WILL SCREW INWARDS
(COUNTER CLOCKWISE) ONTO THE REAR END OF THE
TONEARM
.
EVERY FULL TURN OF THE SCALE RING
REPRESENTS AROUND 5.0 GRAM (+/-0.5 GRAM).
-
FOR THE DEFAULT AUDIO-TECHNICA AT-3600L CARTRIDGE, TURN THE
WEIGHT
-
COUNTER
INWARD TILL THE
SCALE RING AGAINST THE SCALE LINE ON THE REAR END OF THE
TONEARM
.
