5
WEIGHT COUNTER END IS TOO HEAVY, TURN THE WEIGHT COUNTER INWARD TO ADJUST:
HEADSHELL END IS TOO HEAVY, TURN THE COUNTERWEIGHT BACKWARD TO ADJUST:
ANTI-SKATING ADJUSTMENT
TO ADJUST THE ANTI SKATING MECHANISM, TURNING THE
ANTI-SKATE KNOB
COUNTER CLOCKWISE CAN
REACH 0 GRAM OF TRACKING FORCE. TURNING THE
ANTI-SKATE KNOB
CLOCKWISE CAN REACH 4 GRAM
OF TRACKING FORCE. ADJUST THE
ANTI-SKATING KNOB
IN CASE OF NEEDLE SKATING.
PICKUP SELECTOR
-
PHONO / LINE SELECTOR
IS LOCATED AT THE BACK PANEL.
-
SELECT “
PHONO
”, AUDIO SGINAL WILL BY PASS INTERNAL PRE-AMPLIFIER WITHOUT ANY PROCESSOR.
THEN TURNTABLE HAS TO BE CONNECTED WITH EXTERNAL PRE-AMPLIFIER FOR MUSIC PLAYBACK.
-
SELECT “
LINE
”, AUDIO SIGNAL WILL BE PROCESSED BY INTERNAL PRE-AMPLIFIER. TURNTABLE CAN
BE DIRECTLY CONNECTED WITH ACTIVE SPEAKER FOR MUSIC PLAYBACK.
-
REMOVE THE STYLUS PROTECTOR.
-
BE SURE THAT THE TONE ARM IS BEING DETACHED FROM THE TONE ARM REST PART BEFORE
OPERATING AND RE-SECURED AGAIN AFTERWARDS.
-
PUSH THE
LIFT LEVER
UPWARD TO RAISE THE TONE ARM FROM THE ARM PARK, AND THEN SLOWLY
MOVE IT TO THE RECORD SIDE, THE PLATTER WILL START TO ROTATE.
-
PUT THE
LIFT LEVER
DOWNWARD TO DROP THE TONE ARM AND TOUCH THE RECORD GENTLY.
PHONO PLAYING STARTS NOW.
-
PUSH THE
LIFT LEVER
UPWARD TO RAISE THE TONE ARM FROM THE ARM PARK, NOW PLATTER WILL
STILL BE ROTATING BUT PHONO PLAYING WILL STOP. TO CONTINUE THE PLAYING, THE USER NEEDS
TO PUT DOWN THE
LIFT LEVER
.
-
33RPM / 45RPM SPEED SWITCH:
DEPENDING ON THE RECORD TO BE PLAYED TO SWITCH 33RPM
OR 45RPM TURNTABLE PLAYBACK.
-
START / STOP SWTICH:
STOP TURNTABLE FROM ROTATING OR RESUME TO WORK.
-
USE THE 45 RPM ADAPTOR IF REQUIRED.
-
THERE IS
AUTO RETURN ON/OFF BUTTON
AT THE BACK PANEL TO SWITCH ON/OFF THE AUTO
RETURN TONE ARM FUNCTION. IF THE AUTO RETURN FUNCTON IS ON, THE TONE ARM WILL RETURN
AUTOMATICALLY AFTER THE PLAYBACK OF RECORD FINISHED.
-
TRIGGER THE
EJECT SWITCH
DURING RECORD PLAYING, TURNTABLE WILL STOP GENTLY AND TONE
ARM WILL UTOMATICALLY RETURN TO THE TONE ARM REST PART.
-
SINCE THERE ARE NUMEROUS VINYL MAUFACTURERS, WE DO NOT GUARANTEE AUTO RETURN
FUNCTION IS APPLICABLE ON ALL VINYL. IF THE TONEARM CANNOT RETURN AUTOMATICALLY, PLEASE
TRIGGER THE
EJECT SWITCH
TO ACTIVATE AUTO RETURN
