Guangzhou Yingfeng Lighting Equipment Co.,Ltd
www.yf-light.com
6. Common problems and solutions
Although the products made from our factory have bean rigorous tested before send
out, but because of the transport environment is not expected , the error installation
and commissioning, the passage of time, individual electronic components aging
factors,will cause some problems. If your LED par light have some problems that
affect your normal use please refer to the following solutions or contact the dealer
directly.
LED par light problem and solution table
Problems
Reasons
Solutions
1.The light don’t light up, no
menu display, the fan can’t
running
1. Don’t have power
2.The power input circuit didn’t
connected
Connecting
the
power
correctly
2.One of the LED par didn’t
controlled by the signal
1.The address is incorrect, not in
the DMX mode
2.The Id code is incorrect, the
signal connecting is incorrect
Reset the parameter and
reconnecting
the
signal
cable
3.One of the LED par light is
running inconsistent to the
others
1.The LED par channel mode is
not the same
Readjust
4.One color of one LED par
light didn’t light up
The LED bead is virtual welding
or burned out
Well welding or replaced
the LED bead
