5
Attaching the Rail Bracket
Place the Rail Bracket on the top of the opener as shown in
Fig.1. Secure the bracket firmly using 1/4” flange nut x 5.
To Assemble Rail and Opener
1.
Prepare the rails as shown in Fig.2.
2.
Connect the rails starting with the Header Segment. Insert
the tapered ends into open ends, apply any additional force
necessary by tapping the Rail on padded flooring. Ensure
the End Segment has Trolley Stop Bolt facing up. Make
sure the rails are securely joined together as shown.
3. Slide the Trolley onto the rail from the Header Segment.
Make sure the arrow is pointing towards the door as shown
in Fig.2.
4. Connect the rail assembly to the Rail Bracket on the
Opener.
!
WARNING
To prevent SERIOUS INJURY:
- DO NOT connect power until instructed.
- Keep hands and fingers clear from sprocket during operation.
- Wear gloves when installing chain/belt and cable.
- Keep hands and fingers away from joints and possible sharp edges.
Trolley direction (Top View)
!
CAUTION
- DO NOT connect power until instructed.
- To prevent INJURY, keep hands and fingers
away from joints and possible sharp edges.
- Wear gloves when installing chain/belt and cable.
When connecting the rails ensure they are securely connected as shown above.
To apply additional force tap gently on the end of the rail with a rubber mallet*.
*Only use a soft rubber mallet to tap on the end of the rails as other tools may
damage your rail.
Rail — Header Segment
Rail — Middle Segments
(tapered) x 3
Rail — End Segment (tapered)
with Trolley Stop Bolt
Fig.2
Loosely connected
Securely connected by applying force
Rail and Trolley Assembly
Fig.1
1/4” Flange Nut x5
