GB
11
7
Failures - Causes - Troubleshooting
CAUTION: CHECK FIRST FUSES RATING TO PREVENT OVERHEATING !
Failure
Cause
Troubleshooting
Machine does not
work
1. Machine is not properly switched on
2. Extension cable is damaged
1. Please refer to chapter "Operation“
2. Check the cable and replace possibly
Machine works
intermittently
1. Extension cable is damaged
2. Inner unit wiring damaged
1. Check the cable and replace possibly
Contact the service centre
Machine vibrates
excessively
1. Non-balanced rotating parts
1. Check possible damages of rotating parts
8
Inspections and Maintenance
Sharpening or cutting blade replacement
Only trained persons should do this as unqualified assembly can cause serious injuries.
Use only original spare parts.
8.1
Inspection and Maintenance Safety Instructions
Only a unit maintained and cared for on a regular basis may be a serviceable aid. Insufficient maintenance
and care may result in emergencies and unforeseen accidents.
Disconnect always mains leads before any work on the unit !
Do not use any aggressive cleaning agents. It can lead to damages or even to the unit
destruction.
8.2
Inspections and Maintenance Schedule
Time interval
Description
Other details
if necessary
Before start of work
Lubricate the blade driveshaft by general-purpose oil.
After every use
Remove branches and/or bush residues from rotating parts by brush or some blunt
instrument.
Clean the unit by soft cloth.
Crusted dirt can be removed from the unit by soft, soap water wetted cloth.
Annually / if necessary
Have the trimmer blade sharpen event. changed.
9
Spare Parts
GB
Please read carefully these Operating Instructions before putting the appliance into operation.
A.V. 2 Any reprints, even partial, are subject to approval. Technical changes reserved. Pictures just for illustration
purposes!!!
GB
Do you have any technical questions
?
A claim
?
Do you need spare parts or the Operating Instructions
?
You will be helped quickly and without needless bureaucracy at our webpage
www.guede.com in the Services part
. Please help us be able
to assist you. To be able to identify your appliance when claimed, we need to know its serial No., order No. and year of production. All these
details can be found on the type label. Enter the details below for future reference.
Serial No. Order No. Year of production
:
E-Mail:
support@ts.guede.com
