GÜDE 94060, Translation Of Original Operating Instructions

Introduction 

To enjoy your new electric garden shredder as long as 
possible, please read carefully the Operating Instructions 
and the attached safety instructions before using it. 
Further, we recommend keeping the Operating Instructions 
to recall the product features in the future. 

Within the continuous product development, we 
reserve the right to make technical changes to 
improve it. 

This document represents translation of the original 
Operating Instructions. 

Supply includes 

Take the machine out of the transport package and check 
whether there are the following parts: 

•

GH 2400 Garden Shredder 

•

2 pcs of transport wheels with wheel covers 

•

Axis 

•

Feeding help 

•

Collection box 

•

4 screws with washers 

•

Allen key 

•

Spanner 

•

Original Operating Instructions 

Please contact your dealer if any parts are missing or are 
damaged. When assembled, the machine weighs 14 kg. 
Take the machine out of the transport package in two 
people if necessary. 

Machine specification 

Robust garden shredder with a knife cutting mechanism. 
Ideal for trees and bushes. Shredded material is 
effortlessly ground by the steel rotary knife, accelerating 
the composting process. Automatic pulling-in of shredded 
material within 

Ø

 40 mm.

Pic. A

1. Feeding 

help 

2. 

Electric garden shredder 

3. 

Adjusting screw to control the shredded material 

 size 

4. Tank 

cover 

5. Transport 

wheel 

6. Feet 
7. Collection 

box 

8. Overload 

protection 

9. ON/OFF 

switch 

10. 

Cover opening screw 

Technical specifications 

GH 2400 

#

94060 ELECTRIC GARDEN SHREDDER 

Voltage/frequency: 

230V~50Hz

Engine output: 

2,500W (P1;S6 40%)**

Max. engine speed:

 4,,050 

per 

min

-1

Protection type/class: 

IPX4 / II

Max. branch diameter: 

max. 40mm

Collection box capacity: 

50l

Noise:  

L

WA

 111 dB*

Dimensions LxWxH:  

550x450x930 mm

Weight:  

 14kg

 
* 

Noise information 

Measured values learnt according to 2000/14/EG 
(1.60 m height, 1 m distance) – measurement tol-
3dB 
 
** 
The S6 40% operating mode means a load profile of 40  
seconds of load and 60 seconds of idle running. Long-term  
operation is admissible for practical use.  

General safety instructions 

Read carefully these Operating Instructions. Familiarise 
with the controls and proper use of the machine. Keep the 
Operating Instructions for future reference. 

•

The machine meets the EN 61000-3-11 requirements 
and is subject to special conditions for connection. 
That means that using the machine on any points of 
connection is not allowed. 

•

The machine may lead to temporary voltage spikes 
under inappropriate system conditions. 

•

The machine has exclusively been designed to be 
used on points of connection not exceeding the 
maximum allowable system impedance Zmax = 0.233 

Ω

.

•

As the user, you must make sure, after an agreement 
with your energy supplier if necessary, that your point 
of connection where you want the machine to be 
operated meets the requirement specified above.  

 
Safe work 
Keep the place of your work clean!

Any mess in the place of your work may result in injuries. 

 
Consider the environment influences 

Do not expose the machine to rain.

Do not use the machine in a moist or wet environment.

Provide adequate lighting.

Do not use the machine near flammable liquids or gases. 

 
Keep other persons in a safe distance! 

Do not let other persons, especially children, touch the 
machine and the cable. Keep them in a sufficient distance 
from the place of your work.

 
Store the machine properly! 

A machine that is not being used must be kept in a dry and 
locked place, inaccessible to children. 

 
Do not overload the machine! 

Work within the specified power range. 

 
Use the right machine! 

Do not use the machine for purposes for which it has not 
been designed.  

Take care of your machine! 

Comply with the servicing regulations and instructions. 

At regular intervals, check the machine cable and have it 
replaced by an authorised professional if damaged.  
At regular intervals, check the extension cable and replace 
it if damaged. Keep the handles dry, with no oil and 
grease. 

 
Be careful! 

Pay attention to what you are doing. Work reasonably. Do 
not use the machine when you are tired.

 
WARNING! 

Using any other accessory equipment may represent a risk 
of injury for you. 
 

Have your machine repaired by an electrician only! 

This machine meets the applicable safety provisions. Any 
repairs may only be executed by an electrician, using 
original spare parts, otherwise, the user could face a risk of 
injury.

9