11
GB
ENGLISH
Technical Data
Woodturning lathe set
1000
Art. No
00501
Mains voltage
230 V
Mains frequency
50 Hz
Motor power
370 W (P1)
Spindle speed
850 / 1250 /
1750 / 2510
min
-1
Workpiece diameter max.
320 mm
Workpiece length max.
1000 mm
Net/gross weight
22/23,9 kg
Noise details
Sound pressure level L
pA
85 dB (A)
Measured according to EN 61029; Uncertainty K =
3 dB (A)
Wear ear protectors!
The numerical values given are emission levels and
not necessarily safe working levels. Although there
is a correlation between the emission levels and the
acceptable exposure levels, they cannot be reliably
used to determine whether or not any additional sa-
fety measures are necessary. The characteristics of the
work space, other sources of noise, i.e. the number of
machines and other processes running in the vicinity
and so on, are all factors that can influence the actual
exposure levels of the employees. Moreover, the
acceptable exposure levels can vary from country
to country. This information should enable the
machine‘s operator to carry out a better assessment
of the risks and hazards.
Read and understand the operating
instructions before using the
appliance. Familiarise with the
control elements and how to use the appliance
properly. Abide by all the safety measures stated in
the service manual. Act responsibly toward third
parties.
The operator is responsible for accidents or risks to
third parties.
Persons over 16 years of age can only work on the
appliance. An exception includes youngsters trained
in order to reach knowledge under supervision
of the trainer during occupational education.
In case of any doubts about connection and operati-
on refer please to our customer center
Specified Conditions Of Use
The woodturning lathe is suitable for working with
small workpieces made of solid wood. Please note
the maximum length and maximum diameter of the
workpiece.
The machine may only be used in a technically
perfect condition and taking into account all safety
information.
Do not use this product in any other way as stated
for normal use. Not observing general regulations
in force and instructions from this manual does not
make the manufacturer liable for damages.
It is strictly prohibited to disassemble, modify
and purposely remove the protective equipment on
the unit and fit other protective equipment instead.
Even when the device is used properly and all safety
regulations are complied with, there still may be
some residual risks.
• noise emissions
• dust emissions
• vibrations to hand and arms
• Danger of burns
Tool and workpiece heat up during operation.
• Risk of injury
Sharp tools and workpiece edges
Emergency procedure
Conduct a first-aid procedure adequate to the injury
and summon qualified medical attendance as quickly
as possible. Protect the injured person from further
harm and calm them down. If you seek help, state the
following pieces of information: 1. Accident site, 2.
Accident type, 3. Number of injured persons, 4. Injury
type(s)
Symbols
WARNING/CAUTION!
Warning against cutting injury
Warning against dangerous electric
voltage
Warning against thrown-off items
WARNING - Read the operating instruc-
tions to reduce the risk of injury.
