Technical specifications:
Voltage/frequency
Engine power
Rated splitting force
Max. length of split wood
Output shaft revolutions
output shaft
operating performance
Output shaft revolutions –
output shaft
Max. diameter of split wood
Weight
Use as designated
The hydraulic wood splitter may only be used in an upright
position and pieces of wood may only be split in an upright
position in the fibre direction.
Any other use is considered a use in conflict with the appliance
designation. The manufacturer will not be liable for any
consequential loss – the risk will be bore by the user.
Disposal
Disposal instructions are illustrated in the form of pictograms
on the device or packaging. Description of the pictograms is
given in "Identification" chapter.
Disposal of transport packaging
Packaging protects the device against damage during
transport. Packaging materials are usually selected according
to their effect on environment and disposal methods and can
therefore be recycled.
Returning of the packaging back to circulation saves resources
and costs for packaging disposal.
Parts of the packaging (e.g. foil, styropor) may be dangerous
for children.
Risk of suffocation!
Keep these parts of the packaging out of reach of children and
dispose as soon as possible.
Operating staff requirements
The operator must carefully read the Operating Instructions
before using the appliance.
Qualification
No special qualification is necessary for using the appliance
apart from detailed instruction by an expert.
Minimum age
The appliance can only be operated by persons over 18 years
of age. An exception includes youngsters operating the
appliance within their professional education to achieve
necessary skills under trainer's supervision.
Training
Using the appliance requires only appropriate instructions by a
professional or reading the Operating Instructions. No special
training necessary.
Technical specifications
DHH 1100/13 TEZ
H x W x D in mm
2,600 x 850 x 1,300 mm
Max. length of split wood
1050 mm
Max. diameter of split wood
500 mm
Max. cylinder stroke
990 mm
Rated splitting force
13 t
Forward movement speed
motor 4 / 11 cm/s –
output shaft 8 / 18 cm/s
Backward movement speed
Motor 7 cm/s –
output shaft 13 cm/s
Oil tank capacity app.
16 l
Mode type
Electric motor + output shaft
Hydraulic pressure
210-220 bar
Weight
App. 300 kg
Voltage/frequency
400 V/50 Hz
Engine power
4,5 kW (6,1 PS)
tractor power
15 PS / 11 kW
Output shaft revolutions
540 min
-1
Art. No.
01977
DHH 1100/13 TZ
H x W x D in mm
2,600 x 850 x 1,300 mm
Max. length of split wood
1050 mm
Max. diameter of split wood
500 mm
Max. cylinder stroke
990 mm
Rated splitting force
13 t
Forward movement speed
8 / 18 cm/s
Backward movement speed
13 cm/s
Oil tank capacity app.
16 l
Mode type
output shaft
Hydraulic pressure
210-220 bar
Weight
App. 270 kg
Voltage/frequency
output shaft
tractor power
15 PS / 11 kW
Output shaft revolutions
540 min
-1
Art. No.
01976
Transport and storing
The appliance may only be transported with the engine being
switched off (#01977).
Clean the appliance properly before storing it.
Keep the appliance in a clean and dry place.
Oil may leak during appliance transport. Please secure
the appliance properly and take measures to protect the
environment.
Transport:
Transport by high-lift/pallet truck:
The appliance is fixed to a pallet using straps for transport
to the customer.
Transport by a crane:
To transport the appliance by a hook, circular loops on
the casing will be used.
Never lift the appliance by its splitting knife!
Never transport the appliance in a horizontal position
(oil may leak)
Installation:
The appliance has been designed for works on flat surfaces
and it must be installed on a hard base to be appropriately
stable.
13
Summary of Contents for DHH 1100/13 TEZ
Page 2: ...2 9 8 3 4 5 6 7 3 5 6 4 1 1 2 1 2...
Page 3: ...11 10 12 13 A 3...
Page 4: ...14 15 16 17 18 4...
Page 55: ......
