13
Expert PDU energy 8310
Configuration
Syslog Server IP
4.3.6.2
If syslog is active enter here the IP address of you Syslog server.
Syslog Port
4.3.6.3
If syslog is active enter here the port number, that your Syslog server uses to receive syslog information.
More information about Syslog you can find in chapter Syslog, on
http://www.gude.info/wiki
or ask our support team.
Configuration - E-Mail
4.3.7
Enable E-Mail
4.3.7.1
Here you can activate the e-mail function of the device.
E-Mail server
4.3.7.2
Enter the e-mail server, e.g. mail@gmx.net
Sender address
4.3.7.3
Enter the address, the device should use, when sending e-mails.
Recipient address
4.3.7.4
Enter the e-mail address of the recipient.
Enable Authentifiaction
4.3.7.5
If your e-mail server needs an authentification, you can enter it here.
Username
4.3.7.6
Enter the username, the device should use to log on your e-mail server.
Set new password
4.3.7.7
If your server needs a password for sending e-mails, you can enter it here.
Repeat password
4.3.7.8
Repeat the password, to enable it.
