Operator Requirements
The operator shall read the instruction manual carefully before using the unit.
Qualification
No special qualification is required for use of the unit except for detailed direction by a professional.
Minimum Age
Only persons above 16 years of age are allowed to work with the unit. .
Exempted from the provision is the use of the juvenile trainees if they work in the course of their professional training with an aim to
obtain the skill under a trainer supervision.
Training
Use of the unit requires adequate lesson by a professional or the use of the manual only . Special training is not required.
Technical Data
TK 2400 ECO
Power connection
230 V
Frequency/Protection type
50 Hz
Max. output P
1
1500 W/S6; 40 %
Motor speed
5700 min
-1
Saw disc
254 mm/30 mm/24 teeth
Cutting output at 90°
75 mm
Cutting output at 45°
60 mm
Bench size - width
446 mm
Extension tables incl.
946 mm
Bench size – depth
640 mm
Bench size – height
850 mm
Acoustic output level
L
WA
87,3 dB
L
PA
99,5 dB
Weight (approximate)
23 kg
Ordering No.
55166
Transportation and Storage
•
The unit should be cleaned thoroughly for longer storage .
•
Always push the disc in to prevent injuries .
•
Protect the saw with a plastic sheet, cardboard etc. from weather effects .
Assembly and Initial Operation
Structural group 1
Delivered parts and
accessories
Fig. 3
Fig. 1 – pos. 2/4 x
Fig. 1 – pos. 6/4 x
Fig. 1 – pos. 8/16 x
Fig. 1 – pos. 9/16 x
Fig. 1 – pos. 10/16 x
The saw may be used without the base, on a table or a bench !
Structural group 3
Required structural groups
Delivered parts and
accessories
Structural group 2
Fig. 1 – pos. 8/4 x
Fig. 1 – pos. 9/4 x
Fig. 1 – pos. 10/4 x
Make sure that the saw has
sunk and settled firmly. Fix
the saw and base with
screws .
22
