10.3
Waste management compliant assemblies
10.3.1
Disassembly
CAUTION
Oil, greases
Oils and greases are harmful to the environment!
• The oils and greases must not get into the drinking water supply. Take ap-
propriate measures
• Observe the country-specific safety data sheets
• Oils and greases must be disposed of as hazardous waste, even if the total
quantity is small
CAUTION
Leaking batteries
Battery fluids and their fumes are hazardous to the environment, corrosive
and poisonous! They cause injury to persons and damage to property!
Observe the following points:
• Make sure there is good ventilation in closed rooms before repairing leaks
• Wear safety goggles and gloves
• Prevent battery fluids from getting into the drinking water supply
• Use only dry cleaning cloths without detergents
• Dispose of batteries in an environmentally friendly manner
Disassemble the product as follows:
Prerequisite:Prior to disassembly, shut down the product
1
Remove the connecting elements (cables / energy chains)
2
Disassemble assemblies
3
Disassembly the assemblies and separate the different materials
The product has now been disassembled.
Disposal
OPERATING MANUAL Automatic lubrication system
FlexxPump 402 / 402B
90071992656444683_v9.0_
EN-US
119
